Nibe VVM 320 - Smart Energy Source Management; Smart Energy Source Settings

SMART ENERGY SOURCE™
tariff periods, electricity
tariff per, ext. shunt add
SMART ENERGY SOURCE 4.1.8
settings
set. price
tariff per, ext. step add
tariff periods, OPT10
control method CO
2
smart energy source
settings 4.1.8.1
settings
set. price
CO2 impact*
tariff periods, electricity
tariff per, ext. shunt add
tariff per, ext. step add
tariff periods, OPT10
The function prioritises how / to what ex-
tent each docked energy source will be
used. Here you can choose if the system
is to use the energy source that is
cheapest at the time. You can also choose
if the system is to use the energy source
that is most carbon neutral at the time.
Menu
4.1.8
*Select control method "CO
2
" under settings to open this menu.
SETTINGS
control method price per kWh
smart energy source
settings 4.1.8.1
smart energy source™
Setting range: Off/On
Factory setting: Off
control method
Setting range: Price / CO
2
Factory setting: Price
Menu
4.1.8.1
63Chapter 3 | VVM 320 – at your serviceNIBE VVM 320