Nidac VST62 - Appendix B: User Code Programming Summary

30
APPENDIX B: USER CODE PROGRAMMING SUMMARY
The factory default manager code is 1111.
To enter manager mode press   <manager code> 
(the final  is not required when using fixed length codes)
The keypad will beep 5 times and the Mode LED will be flashing Green 
Using Regular Method
Add a Standard User Code for Lock Control
 <user location> <code> 
Add a Standard User Code for Auxiliary Lock Control
 <user location> <code>    
Add a Standard User Code for Lock & Auxiliary Lock Control
 <user location> <code>    
Add a Primary User Code for Lock Control
 <user location> <code>   
Add a Primary User Code for Auxiliary Lock Control
 <user location> <code>     
Add a Manager Code for Lock Control
 <user location> <code>   
Delete a code from a known location
 <user location> 
Where <user location> is a 3 digit location from 001 to 500
Using Search Method
Add a Standard User Code for Lock Control
  <code> 
Add a Standard User Code for Auxiliary Lock Control
  <code>    
Add a Standard User Code for Lock & Auxiliary Lock Control
  <code>    
Add a Primary User Code for Lock Control
  <code>   