Nidac VST62 - APPENDIX C: QUICK SETUP GUIDE

32
APPENDIX C: QUICK SETUP GUIDE
Set a new Installer code
1. Enter Installer Mode
      
2. Set new installer code
    <new installer code> 
3. Now set any other installer options
4. Exit Installer Mode
  
Add a new Manager code and User code
1. Enter Manager Mode
      
2. Add new installer code (disables 1111)
  <new manager code>   
3. Add new user code for lock control
  <new user code> 
4. Repeat step 3 for more user codes.
5. Delete a user code for lock control
  <existing user code> 
6. Exit Manager Mode
  