Nidec DUB Series - Convenient Functions of Controller; Timer

19
Operating procedure Display panel
(1)
(2)
Input time.
(3)
Operating procedure
(1)
Operating procedure Display panel
(1)
(2)
(3)
Input the starting time of 󳞛ring.
(4)
(5)
6
Convenient functions of controller
1 Timer
* If you do not operate any keys for 10
seconds, the display turns back to show
the kiln temperature.
You can set the timer in the following 2 ways.
Push
Time shows 24 hours a day.
Range to input
Within 23 hours and 49 minutes
Unit of time is “minute”
Maximum 9999 minutes
(6.9 days)
Minimum 0 minutes
2. What time you start 󳞛ring
1. In how many minutes you start 󳞛ring after pushing key.
Push
Push
Push
When you want to cancel the timer you set
1 Timer
Push and input another program.
→
1 In how many minutes you start 󳞛ring after pushing key.
2 What time you start 󳞛ring
For example 65min.
For example 13:34
Self
Prog.
The indicator
lights up.
Basic
Prog.
P.8
Setup of Timer
shows 󳞜ashing.
shows 󳞜ashing.
Push after inputting the
program.
Push after inputting the
program.
The indicator
lights up.