Nidec DUB Series - Lock

21
Operating procedure Display panel
(1)
Enter into buzzer setting mode.
More than 5 seconds
(2)
Enter into the buzzer setting mode“AL-2”.
(3)
Push the key of the process which you
want to ring the buzzer.
(4)
Register (Preserve) the setting.
Operating procedure Display panel
(1)
More than 5 seconds The indicator lights up.
(2)
Buzzer blips.
Operating procedure Display panel
(1)
More than 5 seconds The indicator lights off.
(2)
Buzzer blips.
6
Convenient functions of controller
3 Lock
2 Buzzer
3 Lock
You can lock input keys to prevent operating mistake of the program during 󳞛ring or
the registered program.
1. Lock
2. Cancel the lock.
Push for more than 5 minutes.
Push for more than 5 minutes.
*You can con󳞛rm the process, setting
temperature, and program number
during 󳞛ring even if key input is locked.
3. Ring the buzzer after 󳞛nishing the designated process.
＋
shows 󳞜ashing.
Hold1 Hold2
Temp.1
Temp.4
Temp.3
Temp.2
Step1 Step2 Step3 Step4
The indicator
󳞜ashes.
For example
Step2