Nidec DUB Series - Firing of Controller; Firing by Basic Programs; Variation and Contents of Basic Programs

13
Start
Stop
Basic
Prog.
Self
Prog.
Step1 Step2 Step3 Step4
Hold1 Hold2
Temp.1
Temp.4
Temp.3
Temp.2
Step1 Step2 Step3 Step4
5
Firing by controller
1. Variations and contents of basic programs
＜ Contents of basic program ＞
※
Firing time may be longer by contents or variations of the kiln, compared with those of the above list.
Glaze 󳞛ring
1220 ～ 1270℃
Bisque 󳞛ring
700℃
Trial operation
400℃
Overglaze / Raku 󳞛ring
800℃
Drying
200℃
1 Firing by “Basic programs”
1 Firing by “Basic programs”
＜ Temperature list of basic programs ＞
※
Total 󳞛ring time includes up to Hold2
P.28
<Note for “Self-produced
programs” >
Firing Key Timer Step 1 Temp.1 Step 2
Temp.2
《Hold1》
Step 3
Temp.3
《Hold2》
Step 4 Temp.4 Total time
Drying
0 min.
300 min.
(5h.)
200℃
0 min.
200℃
<0 min.>
0 min.
200℃
<0 min.>
0 min. 120℃
300 minutos
(5h)
Trial
operation
270 min.
(4.5h)
400℃
400℃
<0 min.>
400℃
<30 min.>
Bisque
420 min.
(7h.)
560℃
90 min.
(1.5h)
700℃
<10 min.>
700℃
<0 min.>
520 minutos
(8h 40 min.)
Overglaze
/ Raku
210 min.
(3.5h)
800℃
<0 min.>
800℃
<0 min.>
300 min.
(5h)
Glaze 0 min.
210 min.
(3.5h)
560℃
120 min.
(2h)
900℃
<10 min.>
210 min.
(3.5h)
1220℃
<20 min.>
0 min. 120℃
570 min.
(9.5h)
1230℃
<20 min.>
1240℃
<20 min.>
600 min.
(10h)
1250℃
<20 minutos>
240 min.
(4h)
1260℃
<20 min.>
1270℃
<20 min.>