24
Operating Procedure
①
Take the front cover off.
②
Remove wire for compensation.
Take the nuts off by hands.
③
Take the wire for xing off and
remove thermocouples.
④
Let new thermocouple through
holder and insert to the main body.
⑤
Put the wiring for xing back to
the original position and install
the nuts by hands.
⑥
Install the front cover of the kiln.
8
1.Replacement of Heating Elements
Parts of electric kiln burn out due to long periods of use, frequency in use, and how to use.
Please contact our distributor when you have trouble in operation with the below contents
and the condition of the kiln.
1 How to exchage each
1 How to exchage each
Wire for xing
Wire for
compensation
Thermocouple
Wire for xing
Holder
Wire for xing
Maintenance
① Model of the electric kiln
② Serial Number
③ Year, month and day of purchase
DUB - ( )
( )
( )
Please be sure the model and
manufacturing date described
in serial number of the door.
To Next Page
Loading...
