Safety Information
Description of safety marks:
Warning: A Warning contains information which is essential for avoiding a
safety hazard.
Caution: A Caution contains information which is necessary for avoiding a
risk of damage to the product or other equipment.
Use
Warning
This series of drive is used to control the variable speed operation of
three-phase motor and cannot be used for single-phase motor or
other applications. Otherwise, drive failure or fire may be caused.
This series of drive cannot be simply used in the applications directly
related to the human safety, such as medical equipment.
This series of drive is produced under strict quality management
system. Redundancy or bypass solution is necessary if the drive
failure may cause severe accident or loss.
Installation
Caution
If the drive is found to be damaged or parts missing, the drive cannot
be installed. Otherwise, accident may be caused.
When handling and installing the product, please hold the product
from bottom. Do not hold the enclosure only. Otherwise, your feet
may be injured and the drive may be damaged because of dropping.
The drive shall be mounted on the fire retardant surface, such as
metal, and kept far away from the inflammables and heat source.
Keep the drilling scraps from falling into the inside of the drive during
the installation; otherwise, drive failure may be caused.
When the drive is installed inside the cabinet, the electricity control
To Next Page
Loading...
