Nidec NE200 - PID Parameters (F8)

NE200/300 Series Drive User Manual
Chapter 6 Parameter description 159
clearance to the counting.
F7.33 Running time arrival stop
selection
Range: 0~1【0】
0: Do not stop 1: Stop
When the internal counter value ≥F7.32, the drive can be set to stop or
not by this parameter.
Note: When F7.32=0, this function is invalid.
F7.34 Ao1 4mA/2.00v adjustable
datum
Range: 0.0~100%【20%】
F7.35
②
Reserved
F7.35
③
Ao2 4mA/2.00v
adjustable datum
Range: 0.0~100%【20%】
F7.36 ② Digital output terminal
Pos./Neg. logic
【0000】
Units: Logic of Y1 terminal
Tens: Reserved
Hundreds: Logic of Relay 1
Thousands: Reserved
F7.36 ③ Digital output terminal
Pos./Neg. logic
【0000】
Units: Logic of Y1 terminal
Tens: Logic of Y2 terminal
Hundreds: Logic of Relay 1
Thousands: Logic of Relay 2
6.9 PID Parameters (F8)
F8.00 PID setup channel selection Range: 0～4【0】
This parameter defined the given channel of PID target quantity。
0: PID digital setting, Determined by F8.02.
1: AI1 terminal
Taken as 0~10V analog voltage input.