NE200/300 Series Drive User Manual
Chapter 4 Operation and Display 53
4.1.3 Digital display zone
It is four-digit LED display. Be able to display setup frequency, output
frequency, various monitoring data and alarm code
.
4.2 Function code viewing and modification
The keypad of the NE200/300 drive adopts three levels menu structure
to carry out operations such as parameter setting. The three levels are:
1. Groups of function code (level-1 menu)
2. Function code (level-2 menu)
3. Function code setup value(level-3 menu)
Note:
At level 3 menu, pressing PRG key or ENTER key can return to level-2
menu. The difference between them is that: Pressing ENTER will save the
setup and return to the level 2 menu and then automatically shift to the next
function code; while pressing PRG key will directly return to level 2 menu
TRIP
Light On: Trip (Fault)
Light off: Normal
REMOT
Light On: Be controlled by the terminals
Light Off: Be controlled by the keypad
Blinking: Be controlled by communication.
Unit
Hz
Light On: Current frequency is running frequency
Blinking: Current frequency is set frequency
A Current unit indicator
V Voltage unit indicator
RPM
Light On: Current speed is running speed
Blinking: Current speed is set speed
%
Light on: Current value is running data
Blinking: Current value is set data
Hz+A
Light on: Current value is PID running value
Blinking: Current value is the setup PID value
To Next Page
Loading...
