Nikon Coolpix S3000 User Manual

120
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 The camera is automatically turned on.
When properly connected, the PictBridge startup screen
(
1
) will be displayed in the camera monitor, followed by
the Print selection screen (
2
).
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are properly oriented. Do not use force
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an
angle.
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (A 140) in the
camera’s setup menu to Off, then connect the camera again.
Print selection
4
NO. 4
201 0
1 5/05
12

Nikon Coolpix S3000 Specifications

General

Megapixel	12 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.3 \
Supported aspect ratios	16:9
Maximum image resolution	4000 x 3000 pixels
Still image resolution(s)	640 x 480, 1024 x 768, 2048 x 1536, 2592 x 1944, 3264 x 2448, 3968 x 2232
Focal length range	4.9 - 19.6 mm
Digital SLR	No
Built-in flash	Yes
Power supply type	AC
Aperture range (F-F)	3.2 - 5.9
Camera focusing range	0 - 500 mm
Effective sensor resolution	12 pixels
Focal length (35mm film equivalent)	27 - 108 mm
ISO sensitivity	Auto
Internal memory	47 MB
Compatible memory cards	sd
Display diagonal	2.7 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Material	Metal
Product color	Silver
Battery type	EN-EL10
Battery life (CIPA standard)	220 shots
Flash modes	Red-eye reduction
Scene modes	Portrait
Camera playback	Single image

Weight and Dimensions

Depth	19 mm
Width	94.3 mm
Height	55.9 mm
Weight	116 g