30
Basic Photography and Playback: A (Auto) Mode
Using the Flash
When ISO sensitivity is set to Auto, the flash has a range of 0.5-4.5 m (1 ft. 8 in.-
14 ft.) at the maximum wide-angle zoom position and a range of 0.5-2.4 m (1 ft.
8 in.-7 ft. 10 in.) at the maximum telephoto zoom position.
Setting the Flash Mode
1 Press the multi selector m (flash mode).
The flash menu is displayed.
2 Press the multi selector H or I to choose the
desired flash mode and press the k button.
The icon for the selected flash mode is displayed at the
top of the monitor.
When U (auto) is applied, D is only displayed for a
few seconds, regardless of Photo info settings (A 132).
If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
U Auto
Flash fires automatically when lighting is dim.
V Auto with red-eye reduction
Reduce “red-eye” in portraits (A 31).
W Off
Flash will not fire even when lighting is dim.
X Fill flash
Flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.
Y Slow sync
U (auto) is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
Flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
Flash mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
