20
First Steps
Inserting Memory Cards
Image, sound, and movie files are stored in the camera’s internal memory
(approximately 47 MB) or on removable Secure Digital (SD) memory cards
(available separately; A 150).
If a memory card is inserted in the camera, data are automatically stored on
the memory card and data recorded to the memory card can be played back,
deleted or transferred. Remove the memory card to store data in the internal
memory, or play back, delete or transfer data from the internal memory.
1 Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2 Insert the memory card.
Slide the memory card in correctly until it clicks into
place.
Close the battery-chamber/memory card slot cover.
B Inserting Memory Cards
Inserting the memory card upside down or backwards
could damage the camera or the memory card. Be sure to
check that the memory card is in the correct orientation.
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in (
1
) to partially eject the card. The
card can then be removed by hand. Do not attempt to
remove the card at an angle (
2
).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
