Charging
the
Battery
The
following
chart
explains CHARGE
lamp
status.
CHARGE
lamp
Blinks
On
Flickers
Description
Battery
charging.
Battery
fully
charged.
The
battery
is
not
inserted correctly. Remove
the
battery
and
reinsert
it
into
the
battery
charger
so
that
the
battery
is
lying
flat.
• Charge
the
battery
indoors
with
an
ambient
temperature
of
5
°C
to
35°C
(41°F
to
95
OF)
before
use.
• The
battery
is
faulty.
Unplug
the
charger
immediately
and
stop
charging
the
battery. Bring
the
battery
and
charger
to
a
Nikon-
authorized
service representative
for
inspection.
3 Unplug the charger when charging
is
complete.
Remove
the
battery
and
unplug
the
charger.
~
Note
on
the
Battery Charger
• The supplied battery charger
is
for
use
only
with
a Rechargeable Li-ion Battery
EN-EL
10.
Do
not
use
with incompatible batteries.
•
Be
sure to
read
and follow the warnings for the battery charger on page
iii
before using the battery
charger.
• If
the
battery will
not
be used for
an
extended period, recharge it at least once every
six
months
and run it flat before returning it
to
storage.
~
Note
on
the
Battery
Be
sure
to
read
and follow the warnings for the battery on page iii and the section,
"The
Battery"
(~
153),
before using the battery.
~
Note
on
AC
power
supply
To
power the camera continuously for extended periods,
use
an
AC
Adapter
EH-63
(available
separately from Nlkon)
(~
150).
Do not, under any circumstances,
use
another
make
or model
of
AC
adapter. Failure to observe this precaution could result
in
overheating or
in
damage
to
the
camera.
The
AC
adapter and the supplied audio/video cable or
USB
cable cannot be used at the same time.
75
To Next Page
Loading...
