Nikon D7000 - Connector.pcb.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨹󲨫󲨬 󳉗 󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#683×2
#1035
#1035
[Yellow]
[Gray]
#1035
#851
・
Solder the two wires.
・
Connect the FPC of the connector PCB unit (#1035).
Mount the connector PCB unit (#1035) by sliding it.•
○＝
Boss
・
Arrange the wires as below.
・
Tighten the two screws (#683).
Connector PCB unit
NICS