Nikon D7000 - Togo.pcb;Image.sensor; Sd.cover.unit; Discharge.of.main.condenser

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨱・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#614×4
TA-0015 (8.5×17)
2KΩ/5W
#B431
#436
#435
#440
#859
SD cover unit
・
Open the SD cover.
・
Take out the four screws (#614).
・
Remove the SD cover unit.
・
Peel off the tape [TA-0015 (8.5×17)].
・
Discharge the main condenser.
Discharge of main condenser
3. TOGO PCB/Image Sensor
SD cover unit
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
WARNING!
NICS