#604×3
#158
#158
#604×3
#730×2
#159
#1011
#873
4. Rear Body
・
Attach the battery-eject spring (#159).
・
Mount the battery contact unit (#1011).
・
Mount the battery-eject spring plate (#158).
・
Tighten the three screws (#604).
・
Attach the two pieces of the tape (#730).
Battery contact
・
Attach the each double-stick tape [TA-0026 (8×50), (7.5×17), and (4.5×37.5)].
・
Attach the shield sheet (#873).
Reference position for attaching [#873]
Reference position for
attaching [TA-0026 (8
×50)]
Reference position for attaching
[TA-0026 (4.5×37.5)]
Reference position for
attaching [TA-0026
(7.5×17)]
NICS