Nikon D7000 - Adjustment.of.af-Sensor.mounting.base

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨹󲨪󲨬 󳉗 󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#B2163
J63120
Tool (Device)
󳆎
J63120
2.6 mm
2.7 mm
2.8 mm
󳊉
reference
󳊊
2.9 mm
3.0 mm
Check each size here.
・
Loosen the screw.
・
Insert the red-circled section of AF X-positioning tool (J63120) (2.8mm) into the below green-colored gap.
・
Position the AF sensor unit (#B2163) in the direction of the arrow, and tighten the screw.
Adjustment of AF-sensor mounting base
Screw
NICS