Nikon D7000 - Sb.pcb.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨩󲨱・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#635×3
[Black]
[Black]
[Yellow]
[White]
[Green]
[Blue]
[Gray]
[Orange]
SB PCB unit
・
Unsolder the eight wires.
・
Disconnect the two FPCs.
・
Remove the top cover FPC by releasing from the bosses.
・
Take out the three screws (#635).
○＝
Boss
NICS