Nikon D7000 - Front.cover.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨩󲨨・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#614×2
#611×2
#389×2
#390×2
#616
#394
#397
#27
#B24RP
Front cover unit
・
Insert a lumirror sheet, etc, into the gap of the top cover pop-up section as below. Then raise the section by
sliding the sheet in the direction of the arrow.
Approx.
2cm
Approx.
4 cm
・
Take out the two screws (#614).
・
Remove the front cover unit.
・
Take out the two screws (#611).
Front cover unit
Lumirror sheet
NICS