Nikon D7000 - Disassembly; Warning

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨩・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
Disassembly
Warning
Points to notice for Lead-free solder products
Lead-free solder is used for this product.
For soldering work, the special solder and soldering iron are required.
Do not mix the lead-free solder with the conventional solder.
Use the special soldering iron respectively for lead-free solder and lead solder. They cannot
be used in common.
•
•
•
•
There are high voltage parts inside. Be careful of this electric shock,
when you remove the cover.
You must discharge the main condenser according to the instruction
of this repair manual after you remove the cover.
WARNING!
Caution:
󲼓
In disassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5) in order to
protect electric parts from static electricity.
󲼔
Before disassembling, be sure to remove batteries or AC power cord.
󲼕

their types, etc.
󲼖

ref. In this manual, the application of grease and adhesive is indicated by coloring
󳆎
CFD-409Z
󳆎
EDB0011
(grease: yellow/adhesive: red) or J-number.
Note:
󲼓
What are used in this manual may differ from the actual products in forms, etc.
NICS