EDB0011
#652
Height adjustment of aperture lever
Refer to "
①
Models WITHOUT adjusting mechanism of the aperture lever" of "Height adjustment of
aperture lever" of D/SLR ADJUSTMENT Separate Volume
①
for details.
Standard: 3.3 - 3.6 mm
•
Height adjustment of AF coupling shaft
Refer to "Height adjustment of AF coupling shaft" of "D/SLR ADJUSTMENT Separate Volume
①
" for
details.
Standard: 1.7 ± 0.2 mm
If the result does not meet the standard, turn the below adj. screw for the adjustment.
•
Tool (Device)
J18004
Aperture lever positioning gauge
NICS