Nikon D7000 - Image.sensor.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨩󲨫・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#B1001RP
#1041
・
Remove the TOGO PCB unit (#B1001RP).
Image sensor unit
・
Disconnect the both ends of the connection-FPC (#1041).
The three terminals are being assembled into the
I/F cover unit, so remove [#B1001RP] by sliding it
in the direction of the arrow.
NICS