Nikon D7000 - Page 20

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨩󲨬・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
TA-0016 (8×8)×3
#B20051
#678×3
・
Take out the three screws (#678).
・
Remove the image sensor unit (#B20051).
・
Peel off the three pieces of the tape [TA-0016 (8×8)], and remove the harness.
Caution: Some bodies have the washers that are already put on the mounting surface of the image sensor unit.
NICS