Nikon D7000 - Sb.lower.case.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨹󲨭󲨨 󳉗 󲨼󲨯󲨨󲨨󲨨󲨘󲨥
CFD-409Z
CFD-409Z
#635×2
[Red]
[Black]
CFD-409Z
#317
#318
#630×2
・
Arrange the wires as below.
・
Tighten the two screws (#635).
・
Solder the two wires.
SB lower case unit
・
Mount the each ash pop-up arm (#317 and #318), and tighten the two screws (#630).
Viewed from above
・
Apply the grease (CFD-409Z) to the top cover FPC unit (#B1007).
NICS