Nikon D7000 - X-Delay.adjustment.value

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨹󲨪󲨰 󳉗 󲨼󲨯󲨨󲨨󲨨󲨘󲨥
[Black]
[Red]
-71
+1059
A
B
X-delay adjustment value
Take a note of the data (A/B value) that are imprinted on the shutter (see below), because they will be necessary
to be input when the camera body (except imaging) adjustment is made.
・
Make solder bridges to joint the MD PCB unit (#1005).
・
Solder the two wires.
Make solder bridges
NICS