Nikon D7000 - DCDC.isc.pcb.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨹󲨫󲨮 󳉗 󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#694
#B1002
#683×3
TA-0016
(8×8)
[Blue]
[Green]
#745
#745
DCDC ISC PCB unit
・
Mount the DCDC ISC PCB unit (#B1002).
・
Tighten the three screws (#683).
・
Tighten the screw (#694).
・
Connect the FPC.
・
Attach the tape [TA-0016 (8×8)].
・
Solder the two wires.
・
Attach the sheet (#745).
Fold toward the
direction of the
arrow, and attach.
󳊎
Reference position
for attachment
NICS