Nikon D7000 - DCDC Isc.pcb.unit

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨫󲨮・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#603
#683
#148
#1004
#109
#747
・
Take out the screw (#603).
・
Remove the GND plate (#109).
・
Take out the screw (#683).
・
Remove the GND plate (#148).
Slacken the FPC of the PD PCB (#1004)
and remove it.
・
Peel off the tape (#747).
DCDC ISC PCB unit
NICS