Nikon D7000 - Page 45

󲩎󲨺󲨹󲨪󲨱󲨨󲨨󲨩󲨥󲩊󲨦󲨫󲨰󲨩󲨬󲨦󲨹
󲨥󲨘󲨼󲨫󲨱・󲨼󲨯󲨨󲨨󲨨󲨘󲨥
#1035
#683×2
#1035
[Yellow]
[Gray]
・
Take out the two screws (#683).
・
Pull out the arranged wires.
・
Remove the connector PCB unit (#1035) by sliding it.
・
Unsolder the two wires.
・
Disconnect the FPC.
NICS