Nikon E2 - Setting the metering systems

I
Setting the metering systems
This camera features three types of exposure metering
systems-Matrix Metering, Center-Weighted Metering and Spot
Metering.
Rotate the command dial while pressing
the Metering system button.
-The metering system indicators in the LCD
panel
appear in sequence as shown below.
r·l : Matrix Metering
Data on scene brightness and contrast are detected by the
camera's 5-segment advanced matrix sensor. By analyzing
these data, the camera's built-in computer
is able to provide
correct exposure even
in extremely complex lighting situations.
~ (.) ~ : Center-Weighted Metering
This system concentrates the meter's sensitivity on the 12mm-
dia. circle
in the viewfinder. This type of metering is useful in
situations where you want to base exposure on a specific,
centrally located area in the scene.
~ . ~ : Spot Metering
36
Most of the meter's sensitivity is concentrated in the 5mm-dia.
circle
in the center of the viewfinder. This meter is effective when
precise measurement of a particular porti on of the subject is
required.