Nikon E2 - Remote Photography (General)

Remote photography (general)
The optional accessories listed below make it possible for you
to release this camera's shutter from a remote location by
connecting them to the camera's remote terminal. Halfway
shutter release operations are possible with power-hold timer
enabled accessories, but not with the others.
Accessories (with power-hold timer capability)
Remote Cord MC-12A, Modulate Remote Control Set ML-2, Radio
Control Set
MW -2, Intervalometer MT-2, Double Cable Release AR-1 0
- You can set the focus mode to either S, C, or M.
Accessories (without power-hold timer capability)
Terminal Shutter MR-3, Remote Cord MC-4A, Connecting Cord MC-3A,
Modulate Remote Control Set ML-1 , Radio Control Set
MW -1
-Set the focus mode to S or M. (C is not an option).
-Fully depress the shutter release button to take a picture.
-Remove your finger from the shutter release button once before taking the
next picture.
-When using Modulate Remote Control Set ML-l , read the ML-l instruction
manual.
63