28
Individual Operations
3
Item Title Operating sections
3.1 Power ON/OFF Power switch
3.2 Brightness adjustment Brightness control knob, preset switch, ND filter, and color
compensating filter
3.3 Optical path selection (for trinocular
eyepiece tube)
Optical path selection lever
3.4 Stage vertical movement Coarse/fine focus knobs, coarse focus torque adjustment
knob, and coarse focus stopper ring
3.5 Stage rotation Circular graduated stage, vernier, and stage rotation clamp
screw
3.6 Diopter adjustment Diopter adjustment rings
3.7 Interpupillary distance adjustment Eyepiece sleeve
3.8 Adjusting the condenser position Condenser focus knob, condenser centering screws
3.9 Adjusting the aperture diaphragm Condenser aperture diaphragm, objective
3.10 Selecting a condenser Condenser
3.11 Adjusting the field diaphragm Field diaphragm control
3.12 Setting a filter on the field lens NCB filter, ND 16 filter, GIF filter
3.13 Centering the objective Centering nosepiece, objective
3.14 Oil immersion operation Oil immersion type objective, oil immersion type condenser
3.15 Water immersion operation Water immersion type objective, water immersion type
condenser
3.16 Polarization microscopy Polarizer for diascopic microscopy, polarizer for episcopic
microscopy, polarizing intermediate tube (analyzer, Bertrand
lens), P-CL 1/4 λ & tint plate, P-CS Senarmont compensator,
P-CQ quartz wedge
3.17 Episcopic microscopy Epi illuminator
3.18 Image capturing Camera
To Next Page
Loading...
