Nikon Eclipse 50i POL - Adjustment Using ND Filters on the Epi Illuminator; Transmitted Image in the Episcopic Microscopy; Camera Adjustment (Adjusting the Brightness of the Image on the Monitor)

Chapter 3 Individual Operations
3.2 Brightness Adjustment
32
3.2.5
Adjustment Using ND Filters on the Epi Illuminator
The LV-UEPI universal epi illuminator has two filter
sliders. You can use suitable ND filters by operating
the filter sliders.
ND filters are used to adjust the light intensity. A
large number filter has a low transmittance and is
used to get a dark image. ND filters do not affect
the color balance.
ND4 and ND16 filters are provided. You can get the
following four types of brightness by using these
filters.
Brightness
ND4 ND16
1 Out Out
1/4 In Out
1/16 Out In
1/64 In In
(Out: out of the optical path, In: in the optical path
）
3.2.6
Transmitted Image in the Episcopic Microscopy
To perform the episcopic microscopy with the epi illuminator, turn off the power switch of the
microscope to extinct the transmitted image in normal times.
3.2.7
Camera Adjustment
(Adjusting the Brightness of the Image on the Monitor)
When observing images captured by the camera and displayed on the monitor, you can adjust
brightness by varying camera adjustment parameters, such as display mode, exposure mode,
metering mode, exposure compensation, and image level adjustment.
For detailed information, refer to the operating manual provided with the camera or camera
control software.
Filter sliders