Nikon Eclipse 50i POL - Specifications

70
Specifications
8
8.1
Specifications
Nikon microscope ECLIPSE 50i POL
Model ECLIPSE 50i POL
Optical system Infinity-corrected CF optical system
Objective: CFI60
Eyepiece: Field number 22 (for binocular eyepiece tube)
Field number 25 (the trinocular eyepiece tube)
Nosepiece: quintuple (with centering mechanism for objectives)
Focusing mechanism Driving type: manual coarse/fine focusing type (calibration marking for fine
motion: 1 µm/marking)
Stroke: 2 mm up and 28 mm down from the reference (focused) position
with coarse focus stopper mechanism
Stage Provided with verniers
Provided with a rotation mechanism with a clamp
Provided with specimen holders
Illumination Internal Koehler-type diascopic illumination optics
Provided with a preset switch (and a preset brightness control)
Provided with a brightness control knob
Lamp ratings: 6V 30W halogen lamp (Philips 5761)
Average service life of the lamp: 100 hours
Input ratings
100-120VAC/230VAC ±10%, 50/60Hz, 0.9A/0.5A.
Power cord When used in 100-120V areas:
UL-listed detachable power cord set (3 conductor grounding Type
SVT, AWG 18, 3 m long maximum, rated at 125V AC minimum)
When used in 220-240V areas:
EU/EN-approved 3-conductor power cord set (3 conductor
grounding Type H05VV-F, 3 m long maximum, rated at 250V AC
minimum)
Operating conditions
Temperature: 0°C to +40°C
Humidity: 85%RH max.
（
no condensation
）
Altitude: 2000 m max.
Pollution degree: Degree 2
Installation category: Category II
Electric shock protection class: Class I
Indoor use only
Transport/storage
conditions
Temperature: -20°C to +60°C
Humidity: 90% RH max. (no condensation)