Safety Precautions
5
7. Cautions as to conditions for operation, transportation, and storage
The product must be operated, transported, or stored under the following conditions. Using or storing
the product in hot, humid locations may result in mold formation or condensation on lenses,
performance degradation, or malfunctions.
• Operating conditions: temperature (0 to 40°C), humidity (85% RH max., no condensation)
• Transportation/storage conditions: temperature (-20 to +60°C), humidity (90% RH max., no
condensation)
8. Remove any covers from the product before switching on.
Do not use the product while covered with a piece of cloth or so on, as this will result in abnormal heat
and fire hazards.
9. Cautions at to concerning long, sustained observations
To relieve fatigue resulting from long observation sessions, limit continuous observations to one hour.
Take at least 10- to 15-minute breaks between observation sessions. Adjust the layout of other
equipment and the height of your chair.
10. Disposal of the product
To avoid biohazard risks, dispose of the product as contaminated equipment according to the standard
procedure specified for your facility.
CAUTION
To Next Page
Loading...
Need help?
General
