Chapter 4 Assembly
66
8
Installing an Eyepiece
Make sure the notch on the eyepiece side and the
protrusion of the eyepiece sleeve are aligned.
Insert the eyepiece.
9
Installing a Revolving Nosepiece (or Cytodiagnostic Unit)
9-1 Installing a Revolving Nosepiece
(1) Lift the revolving nosepiece from a position
just forward of the point directly below the
fitting part and slide toward the back to
attach. (Continue sliding the revolving
nosepiece until its front position is aligned
with that of the fitting part.)
(2) Secure in place with the tool stored in the
back of the microscope.
9-2 Installing a Cytodiagnostic Unit
(1) Insert the separately packed ink cartridge to
the hole at the rear of the cytodiagnostic unit.
(2) Lift the cytodiagnostic unit from slightly
forward of the point directly below the fitting
part and slide toward the back to attach.
(Continue sliding the cytodiagnostic unit until
its front position is aligned with that of the
fitting part.)
(3) Secure in place with the tool stored in the
back of the microscope.
When fitted correctl
To Next Page
Loading...
