55
IV. Assembly
12
Connecting the Power Cord
WARNING
Be sure to use the specified power cord. Using a wrong power cord may result in
malfunctions or fire. Also, the product is classified as subject to Class I protection
against electrical shock. Make sure it is connected to an appropriate ground terminal
(protective earth terminal).
For specifications of the power cord, refer to “VII. Specification.”
Turn off the power switch on the microscope (flip it to the “ ” side).
Insert the socket of the power cord into the AC inlet on the back of the microscope. Then, securely
plug the power cord to the wall outlet.
To Next Page
Loading...
