Notes on Handling the Product
xii
Safety Precautions
Notes on Handling
the Product
8 Motorized devices
When using motorized devices, do not force the
motorized devices to move/stop by hand.
9 Vibration during motorized operation
While the product is designed to minimize the
amount of vibration during motorized operation,
note that there still may be some effect on the
microscopy results.
10 Unpacking and unlocking
1) Check the package contents.
● ECLIPSE Ni-E Main Body X1
● Hex driver X3
Hex wrench X2
● Toolbox X1
● Accessory sticker X2 types
(A blinder for the mounting hole for accessory
not in use on the top of the arm and
nameplate for an additional ND filter to the
ND filter cassette)
2) Before turning on the power, remove the
tightening screw from the front of the elevating
section. (See Chapter 1 “3 Assembly Method-2
Unfasten the elevating section.” in the
“Assembly/Maintenance” instruction manual for
details.)
3) Do not dispose of the packing materials. They
will be reused for transportation.
To Next Page
Loading...
Need help?
General
