Chapter 3 Individual Operations
157
Individual
Operations
(4) Configuring the Movement (See DS-L3 Chapter 6 “5 Configuring the Movement of Motorized
Devices”.)
Set the movement of the Ni-E microscope and motorized
devices.
[SETUP MENU] → [MOVEMENT]
Configuring the movement
(4-1) Configuring Interlocking
(See DS-L3 Chapter 6 “5.1 Configuring Interlocked Operation”.)
See Chapter 3 “19.2 Interlocking Function” in this document for the details of interlocking.
■ Objective interlocking
(See DS-L3 Chapter 6 “5.1.1 Configuring the Interlocked
Operation with Switching of Objectives”.)
(See DS-L3 Chapter 6 “5.1.2 Changing the Initial Value of
the [INTELLIGENT]”.)
(See DS-L3 Chapter 6 “5.1.3 Automatically Switching the
Movement Speed of the Microscope’s Elevating Section
and Motorized XY Stage”.)
Set a movement that interlocks with switching of objectives.
[OBJECTIVE INTERLOCK] setting
Set the interlocking for each item per objective.
Check the interlock setting of the XYZ speed and parfocal
correction settings here. You must have set the focus position o
each objective in order to do a parfocal correction.
Specifying setting items
Selecting settings (Example: Aperture diaphragm)
(4-3)
(4-1) (4-2)
(4-4)
(4-5)
To Next Page
Loading...
Need help?
General
