Chapter 2 Microscopy Operations
82
Phase Contrast
Microscopy
Preparation
Focus and Optical
System Adjustment
Microscopy
Phase Contrast
Microscopy Procedure
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 ■ ■
22
Turn off the power.
Turn off the power switches (press to the “O” position) on
the control box A and connected motorized devices.
(Each power LED turns off.)
50
60
70
Turning off the device
Switch from Phase Contrast Microscopy to Bright-field Microscopy
Operate the condenser turret to bring the [OPEN] position into the optical path.
For details on other operations and precautions, see “3 Bright/Dark-field Microscopy Procedure”.
Switch from Phase Contrast Microscopy to Epi-Fluorescence Microscopy
See the end of “4 Epi-Fluorescence Microscopy Procedure”.
Power switch
OFF
Power LED OFF
Power LED OFF
Power LED OFF
Power switch OFF
Power LED OFF
To Next Page
Loading...
Need help?
General
