Accessories
H
andle with lock cylinder
If you wish to be able to lock the service doors of the unit, it is possible to
p
urchase handles with lock cylinder and key.
VTZ Compressor
VTZ is a frequency controlled compressor that has a stable and constant
r
egulation. The compressor adjusts the operation according to the cooling or
heating demand, and thus will achieve a high COP value, which means low energy
consumption.
The VTZ compressor can be used with the CTS602i and CTS6000 automatics.
Shut-off damper
Shut-off dampers for external mounting are supplied in sets of 2 pieces. with
a
ssociated damper motor.
• For the CTS602i, a 230V damper motor is supplied
• For the CTS6000, a 24V damper motor is supplied
Water after-heating element
With a water after-heating element you can increase the supply air temperature
t
o the desired level. Water-heater can be built into the system and comes with
the necessary sensors.
The water-heating element is controlled using Danfoss Actuator, which is
connected to the plant.
The unit can also control external heating elements.
Electrical after-heating element
The electric heating element is prepared for mounting internally in the fan unit
V
PM and is equipped with a binary power distribution.
16
To Next Page
Loading...
Need help?
General