Safety
Power supply
CAUTION
Always disconnect the power supply to the unit if an error occurs that cannot be rectified via
the control panel.
CAUTION
If an error occurs on electrically conductive parts of the unit, always contact an authorised
electrician to rectify the error.
CAUTION
Always disconnect the power supply to the unit before opening the unit doors, for instance for
installation, inspection, cleaning and filter change.
Pressure-bearing equipment
CAUTION
Take great care when handling as well as disposal of heatpipe and cooling circuit elements as
these have a pressure of up to 50 bar which can cause personal injury in case of breakage.
Disposal
Heat pump
Concerning disposal of units with heat pumps, it is important to contact the local
authorities for information about correct handling of these. The heat pump
contains the refrigerant 407c, which is harmful to the environment if not handled
properly.
4
To Next Page
Loading...
Need help?
General