Electrical after-heating element (accessory)
CAUTION
The connection of the electric heating element must be carried out by an authorized electrician.
CAUTION
The power supply cable must be connected via the main switch (accessory).
ATTENTION
Assembly of communication cable for board is performed in relation to the attached electrical
diagram.
The electric heating element type EB for the VPM 120-560 series is built into the unit from the factory,
if selected.
The following heating surfaces EB 5-21 (Output 5-21 kW) can be used for the VPM series:
Unit EB5 EB7 EB14 EB21
VPM 120 X
VPM 240 X
VPM 360 X
VPM 480 X X
VPM 560 X X
28
To Next Page
Loading...
Need help?
General