General information
Introduction
General information prior to installation
The following documents are supplied with the unit:
• Installation instructions
• Software instructions
• User manual
• Wiring diagram
• Test report
Instructions can be downloaded from Nilan’s website: https://www.nilan.dk/en-gb/frontpage/
download
If you have questions regarding installation of the unit after having read the instructions, contact your
nearest dealer of Nilan products. You can find Nilan dealers on www.nilan.dk/en-gb/frontpage/
download/dealers.
The purpose of these instructions is to advice the installer on correct installation and maintenance of
the unit.
ATTENTION
In order to avoid discoloration of the plate parts, the protective foil into which the unit is
packaged must be removed immediately after delivery. The discoloration is caused by a
chemical reaction which is triggered by moisture between the foil and the galvanized plate.
Then cover the unit with tarpaulin to protect it.
The unit is delivered fully tested and ready for operation.
Disclaimer
In order to achieve proper operation with the unit, as well as the safety of persons and equipment, the
instructions must be followed. Nilan A / S disclaims any responsibility for any damage resulting from
the use of the unit and / or accessories in violation of the directions and instructions of this manual.
Symbol explanation
CAUTION
Violation of directions indicated by a warning symbol is associated with a life hazard.
ATTENTION
Violation of instructions specified by ATTENTION is associated with a risk of personal injury or
damage to property.
Supervision of application
This guide applies to VPM ventilation and heat recovery units, hereafter referred to as units. See the
Accessories section for information on included accessories and additional equipment.
VPM 120-560 (English) BY NILAN
5
To Next Page
Loading...
Need help?
General