Filter monitoring - Pressure transmitter
Displays the continuous pressure drop across the filter in the CTS control and
g
ives alarm when the filter needs to be changed at the final pressure drop preset
in the CTS control.
Humidity control
Humidity control can be ordered in the air handling unit according to the actual
h
umidity in the extract air - either externally or integrated in the plant.
In the control it is possible to choose either moisture control or CO
2
sensor
Heating Cable
A 3 m long self-regulating heating cable can be ordered for frost protection of
the condensate drain.
Water trap with ball
To prevent "false" air from being sucked into the unit via the condensate drain, a
w
ater trap must be established. When there is water in the condensate drain, the
water trap works very well, but in the summer months, when there is no
condensation of the extract air, the water trap will dry out and no longer prevent
"false" air. A Nilan water trap with ball ensures against "false" air throughout the
year.
Can only be used in the suction side of the unit in the VPM system.
Vibration absorbers
Vibration dampers (sylomers) for placement under the unit ensure effective
d
amping of the vibrations of the unit against the substrate.
Pressure control
The motor for the suction and / or supply fan can be controlled by one or two
p
ressure transmitters mounted in the suction and / or supply duct.
In the standard version, the pressure transmitters come with 5 m cable, including
power supply.
VPM 120-560 (English)
BY NILAN
17
To Next Page
Loading...
Need help?
General