Unit type
P
roduct description
The VPM 120-560 series is a ventilation and heat recovery unit with cooling and heat function specially
developed for commercial construction with an air change requirement of up to 5,600 m³ per hour.
A VPM unit removes the "used" moist air from the building and in turn supplies "fresh" temperate air.
The energy in the extract air is recovered and transferred to the supply air via a unique combination of
active (heat pump) and passive (heatpipe) heat recovery. The high efficiency of the VPM series is due
to this unique design, which combines the best of two technologies. This improves efficiency so much
that the efficiency comes close to 100%. This means that the need for supply of heat during the cold
winter months is reduced to a minimum, and significant savings are achieved on the building's energy
consumption and a reduction in CO
2
-emissions. During summer time, the process is reversed so that
the supply air is cooled.
It is possible to select a heat exchanger in the cooling circuit. It makes it possible to utilize the excess
energy or waste energy created by the cooling process, for example heating hot water.
The unit can be controlled and monitored via our CTS602i control or CTS6000 control.
8
To Next Page
Loading...
Need help?
General