Nilfisk-Advance Advance SC5000 Service Manual

194Service Manual – SC5000 34 - Scrub System, Cylindrical
9. Remove the two link arm retaining clips (G)
and pins (H) from the scrub deck.
10. Slide the deck toward the rear of the
machine so the deck lift linkage will clear
the brush motor, and then slide the deck out
from the right side of the machine.
Note: During replacement, make sure
to connect the brush motors to
the correct connectors. The disc
and cylindrical motors are fused
differently.
G
H

Nilfisk-Advance Advance SC5000 Specifications

General

Brand	Nilfisk-Advance
Model	Advance SC5000
Category	Scrubber
Language	English