Nilfisk-Advance Advance SC5000 Service Manual

67Service Manual – SC5000 04 - Control System
2-091 M1 Hardware Fault
2-092 M2 Hardware Fault
2-093 M3 Hardware Fault
2-094 M4 Hardware Fault
2-095 M5 Hardware Fault
Description Output hardware is defective
Setting
Conditions
Internal hardware fault
When Monitored
Always
Possible Causes
Initial Action
Disconnect the respective motor and reboot the machine. if the error persists,
replace the power module.
Troubleshooting Steps
2-096 Parameter Change
Description Invalid parameter change
Setting
Conditions
When Monitored
Always
Possible Causes
Initial Action Reboot the machine
Troubleshooting Steps
2-097 M6 Act Out Current Sensor
2-098 M7 Act Out Current Sensor
2-101 M10 Option Pump Current Sensor
Description Current sensor has invalid value
Setting
Conditions
Internal error
When Monitored
Always
Possible Causes
Initial Action Reboot the machine. If the error persists, replace the power module
Troubleshooting Steps

Nilfisk-Advance Advance SC5000 Specifications

General

Brand	Nilfisk-Advance
Model	Advance SC5000
Category	Scrubber
Language	English