86Service Manual – SC5000 20 - Drive System
3-019 Quickstop Active
Description A drive inhibit signal was activated while the machine was in motion.
Setting
Conditions
When Monitored
Always
Possible Causes
Initial Action
Troubleshooting Steps
3-020 Throttle not in Neutral
Description The throttle potentiometer was not within the neutral deadband during initialization
Setting
Conditions
When Monitored
Always
Possible Causes
Initial Action Reboot the machine.
Troubleshooting Steps
3-033 Motor Short
Description A short circuit was detected at the output to the wheel motor.
Setting
Conditions
When Monitored
Always
Possible Causes
Initial Action
Troubleshooting Steps
To Next Page
Loading...
Need help?
General
