Scrub System, Disc 89Service Manual – SC3000
Brush Motor Disassembly/Assembly
Disassembly
1. Remove the brush/pad-holder deck.
2. At the workbench, remove the screw (A) from
the reduction unit which has to be disassembled.
3. Remove the hub assembly (B) with a puller.
4. Remove the screws (C).
5. Remove the gearmotor (D).
6. Recover the key (E).
Assembly
7. Assemble the components in the reverse order of
disassembly.
Note: For further information on deck components see the Parts List.
D
E
C
B
A
D
E
C
B
A
P100378
To Next Page
Loading...
